แบ่งปัน EPTAR Reinforcement 7.0.1.663 for ArchiCAD 28

[ADMIN]

ดาวน์โหลด ปลั๊กอิน EPTAR Reinforcement 7.0.1.663 for ArchiCAD 28 | ปลั๊กอินสำหรับ Archicad 28 ฟรี​

Eptar Reinforcement for Archicad เป็นปลั๊กอินที่ออกแบบมาเพื่อช่วยให้นักออกแบบสามารถวาดเอกสาร และระบุรายการเหล็กเสริมที่จำเป็นสำหรับโครงสร้างอาคารใน Archicad โซลูชันนี้ช่วยให้นักออกแบบสามารถทำงานได้อย่างมีประสิทธิภาพมากขึ้นโดยลดเวลาที่ใช้ในการวาดและเอกสารเหล็กเสริม


โซลูชันนี้ช่วยให้นักออกแบบสามารถวาดเอกสารและแสดงรายการการเสริมที่จำเป็นสำหรับอาคารใน ArchiCAD แอปพลิเคชั่นนี้มีเครื่องมือในการกำหนดภาพวาด 2D ทั้งหมดรวมถึงโมเดล 3D ที่สมบูรณ์


โซลูชันประกอบด้วยไลบรารีของวัตถุเสริมแรงต่างๆ และส่วนเสริม ให้อิสระอย่างมากในการกำหนดสิ่งปลูกสร้างและยังช่วยระบุวัตถุที่ซับซ้อนอีกด้วย การเสริมแรง Eptar ยังตรวจสอบหมายเลขรหัสเหล็กเส้นและแก้ไขหากจำเป็น ด้วยเครื่องมือเสริมแรง ผู้ใช้สามารถคำนวณจำนวนเหล็กเส้นที่จำเป็นได้อย่างง่ายดาย รายการเหล็กมีอยู่ในแผนผังชั้นเช่นเดียวกับกำหนดการแบบโต้ตอบ

คุณสมบัติหลักของ Eptar Reinforcement for Archicad:​

• ไลบรารีวัตถุเหล็กเสริม: ปลั๊กอินมาพร้อมกับไลบรารีวัตถุเหล็กเสริมที่หลากหลายที่สามารถใช้ในการออกแบบโครงสร้างใดๆ
• เครื่องมือวาด: ปลั๊กอินมีเครื่องมือวาดที่หลากหลายที่ช่วยให้นักออกแบบสามารถวาดเหล็กเสริมในผนัง แผ่นพื้น คาน เสา และองค์ประกอบเอียง เช่น หลังคา
• เครื่องมือตัดรายการ: ปลั๊กอินมีเครื่องมือตัดรายการที่สร้างรายการเหล็กเสริมโดยอัตโนมัติ รายการเหล่านี้รวมถึงข้อมูลเกี่ยวกับรูปร่าง ขนาด เส้นผ่านศูนย์กลาง คุณภาพ และน้ำหนักของแต่ละองค์ประกอบ
• การผสานรวม BIM: ปลั๊กอินได้รับการผสานรวมกับ BIM ซึ่งหมายความว่าเหล็กเสริมสามารถรวมเข้ากับแบบจำลองอาคาร 3 มิติได้

ประโยชน์ของการใช้ Eptar Reinforcement for Archicad:​

• เพิ่มประสิทธิภาพ: ปลั๊กอินช่วยให้นักออกแบบสามารถทำงานได้อย่างมีประสิทธิภาพมากขึ้นโดยลดเวลาที่ใช้ในการวาดและเอกสารเหล็กเสริม
• ปรับปรุงความถูกต้อง: ปลั๊กอินช่วยลดความเสี่ยงของข้อผิดพลาดในการออกแบบเหล็กเสริม
• การออกแบบที่ดียิ่งขึ้น: ปลั๊กอินช่วยให้นักออกแบบสามารถออกแบบโครงสร้างที่มีประสิทธิภาพมากขึ้น
• การสื่อสารที่ดีขึ้น: ปลั๊กอินช่วยให้นักออกแบบสามารถสื่อสารการออกแบบเหล็กเสริมของตนได้อย่างมีประสิทธิภาพมากขึ้นกับผู้รับเหมาและผู้ขาย

โดยรวมแล้ว Eptar Reinforcement for Archicad เป็นเครื่องมือที่มีค่าสำหรับนักออกแบบที่ต้องการเพิ่มประสิทธิภาพและความถูกต้องของงานออกแบบเหล็กเสริม


Features:

• reinforcement of slanted walls cropped to a roof
• handling of Archicad openings in the wall
• accurate usage of structural core definition in slab
• listing of iron chair element
• automatic notification about new versions
• place automatically the reinforcement in simple profiled beams using rf_beam complex element
• place automatically the reinforcement in simple profiled column using rf_column complex element
• list of beams and column reinforcement elements
• extended 2D view types of rebars
• reverse the bending direction of rebars in slab and wall
• the option to indicate different text content in floorplan labels of rebar
• the option to indicate different text content in floorplan labels of mesh
• indicate (select) on floorplan all elements listed in already placed Cutting list
• Mesh board designer
• More exact Cutting list for Mesh
• More exact Cutting list for Rebar
• some new additional elements
• Reinforcement of concrete wall edges, by placing shear rebars in corners of openings
• Reinforcement of concrete slab edges, by placing shear rebars in corners of holes
• Slab edge reinforcement and wall edge reinforcement listing by components
• Listing of different length rebars by length
• Automatic update indicator
• Automatic reinforcement of straight, slanted and curved
• Automatic reinforcement of roofs with Mesh and Rebar elements
• Automatic reinforcement of complex roofs
• Automatic reinforcement of multiply roof surfaces
• Most used rebar and stirrup forms are preset, but custom polygonal forms can be set too
• Steel elements can be rotated, thus more difficult constructions (e.g. stairs) can be modeled
• Complex elements (columns, beams and crownings) can be defined
• Many view and display options
• Cutting list generation
• Changes can easily be made on the layout and in the Object Settings window as well

Screenshot

System Requirements

ArchiCAD INT 28 WIN
File Info

Official Website : https://www.eptar.hu/reinforcement
License : Trial
Software Version : 7.0.1.663
File Name : EPTARR7.0.1.663ACAD28.rar
File Size : 10.4 MB
File Type : *.rar
Server : Pixeldrain | Box
Upload date : 29/08/2025
Last modified : 29/08/2025
Password : sbz

รหัสแตกไฟล์คือ sbz ​

 

[paikanpun]

ขอบคุณครับ

 

[vutuan]

Tie xuống Plugin EPTAR Reinforcement 7.0.1.663 cho ArchiCAD 28 | Plugin được tạo bởi Archicad 28.​

Eptar Reinforcement for Archicad là một plugin được thiết kế để hỗ trợ các nhà thiết kế vẽ, lập tài liệu và liệt kê cốt thép cần thiết cho các công trình xây dựng trong Archicad. Giải pháp này cho phép các nhà thiết kế làm việc hiệu quả hơn bằng cách giảm thời gian vẽ và lập tài liệu cốt thép.


Giải pháp này cho phép các nhà thiết kế vẽ, lập tài liệu và liệt kê các kết cấu gia cố cần thiết cho một tòa nhà trong ArchiCAD. Ứng dụng cung cấp các công cụ để xác định tất cả các bản vẽ 2D cũng như mô hình 3D hoàn chỉnh.


Giải pháp bao gồm một thư viện các đối tượng gia cố và tiện ích bổ sung đa dạng, mang lại sự tự do tuyệt vời trong việc xác định các tòa nhà và cũng giúp nhận dạng các đối tượng phức tạp. Eptar Reinforcement cũng kiểm tra mã số cốt thép và hiệu chỉnh nếu cần. Với Công cụ Gia cố, người dùng có thể dễ dàng tính toán số lượng cốt thép cần thiết. Danh sách cốt thép có sẵn trên mặt bằng cũng như trong bảng tính tương tác.

Các tính năng chính của Eptar Reinforcement cho Archicad:​

• Thư viện đối tượng gia cố : Plugin này đi kèm với một thư viện phong phú các đối tượng gia cố có thể được sử dụng để thiết kế bất kỳ cấu trúc nào.
• Công cụ vẽ : Plugin cung cấp nhiều công cụ vẽ cho phép nhà thiết kế vẽ cốt thép trên tường, sàn, dầm, cột và các thành phần nghiêng như mái nhà.
• Công cụ Cắt Danh sách : Plugin có công cụ cắt danh sách tự động tạo danh sách thép gia cường. Danh sách này bao gồm thông tin về hình dạng, kích thước, đường kính, chất lượng và trọng lượng của từng thành phần.
• Tích hợp BIM : Plug-in được tích hợp với BIM, nghĩa là thép gia cố có thể được tích hợp vào mô hình tòa nhà 3D.

Lợi ích của việc sử dụng Eptar Reinforcement cho Archicad:​

• Nâng cao năng suất : Plugin cho phép các nhà thiết kế làm việc hiệu quả hơn bằng cách giảm thời gian dành cho việc vẽ và ghi chép phần gia cố.
• Độ chính xác được cải thiện : Các plug-in làm giảm nguy cơ mắc lỗi trong thiết kế thép gia cố.
• Thiết kế tốt hơn : Các plugin cho phép các nhà thiết kế thiết kế bố cục hiệu quả hơn.
• Cải thiện giao tiếp : Plug-in cho phép các nhà thiết kế giao tiếp các thiết kế gia cố của họ hiệu quả hơn với các nhà thầu và nhà cung cấp.

Nhìn chung, Eptar Reinforcement for Archicad là một công cụ hữu ích cho các nhà thiết kế muốn tăng hiệu quả và độ chính xác cho các thiết kế cốt thép của họ.


Đặc trưng:

• gia cố các bức tường nghiêng được cắt vào mái nhà
• xử lý các lỗ mở Archicad trên tường
• sử dụng chính xác định nghĩa lõi kết cấu trong bản sàn
• Danh sách các thành phần ghế sắt
• thông báo tự động về các phiên bản mới
• tự động đặt cốt thép vào các dầm định hình đơn giản bằng cách sử dụng phần tử phức hợp rf_beam
• tự động đặt cốt thép vào cột có cấu hình đơn giản bằng cách sử dụng phần tử phức hợp rf_column
• danh sách các thành phần cốt thép dầm và cột
• Nếu bạn muốn tạo bản sao 2D, bạn có thể tạo bản sao 2D.
• Để bảo vệ môi trường thì cần phải bảo vệ môi trường và bảo vệ môi trường.
• Nếu bạn là phụ nữ, thì bạn sẽ có thể tự bảo vệ mình và chống lại thời tiết lạnh giá.
• Nếu bạn là một con người thực sự, thì bạn sẽ có thể làm được điều đó trong một thời gian dài.
• chỉ ra (chọn) trên sơ đồ mặt bằng tất cả các yếu tố được liệt kê trong Danh sách cắt đã đặt
• Đây là trường hợp được sử dụng.
• Trong vài năm trở lại đây, quá khứ đã lùi xa từ lâu.
• Danh sách cắt chính xác hơn cho cây thép.
• Trong tương lai, mặt trời sẽ chiếu sáng xuyên qua mặt trời.
• Kiếm được nhiều tiền và kiếm tiền bằng cách kiếm tiền là một ý tưởng hay.
• Gia cố các cạnh của tấm bê tông bằng cách đặt các thanh thép cắt vào các góc của lỗ.
• Danh sách các mảnh thép và các mảnh thép theo từng thành phần.
• Danh sách các loại thép có chiều dài khác nhau theo chiều dài.
• Đây là cách kiếm tiền.
• Trong vài năm trở lại đây, mối quan hệ giữa hai nước đã đảo ngược.
• Đây là cách bảo vệ cơ thể và bảo vệ chính cơ thể của bạn.
• Đây là cách kiếm tiền.
• Đây là trường hợp của những người quan tâm đến nó.
• Trong vài năm trở lại đây, nếu bạn đã có mối quan hệ lâu dài với ai đó, thì bạn sẽ phải lo lắng về điều đó. Tương lai cũng vậy.
• Trong trường hợp một người phụ nữ là một người phụ nữ, cô ấy là một người phụ nữ là một người phụ nữ hoặc một người phụ nữ là một người phụ nữ (một người là một người phụ nữ).
• Trong trường hợp này, điện thoại được sử dụng như một phần phức hợp (cột, lương và đỉnh).
• Trong quá khứ đã có một khoảng thời gian dài.
• Tạo danh sách cắt
• Trong quá khứ, có rất nhiều người đã từng ở thế gian và đã ở thế gian rất lâu.

Ảnh chụp màn hình

Yêu cầu hệ thống

ArchiCAD INT 28 WIN
Thông tin tập tin

Trang web của Trang: https://www.eptar.hu/reinforcement
Giấy phép: Dùng thử
Phiên bản cho ảnh : 7.0.1.663
Tên tệp : EPTARR7.0.1.663ACAD28.rar
Dung lượng lưu trữ : 10,4 MB.
Loại tệp : *.rar
Máy chủ : Pixeldrain | Box
Ngày tải lên : 29/08/2025
Ngày cuối cùng : 29/08/2025
Mật khẩu : sbz

*** Trong trường hợp của một người phụ nữ: đây là trường hợp. ***


Câu chuyện sắp xảy ra. ​

Cảm ơn!

Tải xuống Plugin EPTAR Reinforcement 7.0.1.663 cho ArchiCAD 28 | Plugin miễn phí cho Archicad 28​

Eptar Reinforcement for Archicad là một plugin được thiết kế để hỗ trợ các nhà thiết kế vẽ, lập tài liệu và liệt kê cốt thép cần thiết cho các công trình xây dựng trong Archicad. Giải pháp này cho phép các nhà thiết kế làm việc hiệu quả hơn bằng cách giảm thời gian vẽ và lập tài liệu cốt thép.


Giải pháp này cho phép các nhà thiết kế vẽ, lập tài liệu và liệt kê các kết cấu gia cố cần thiết cho một tòa nhà trong ArchiCAD. Ứng dụng cung cấp các công cụ để xác định tất cả các bản vẽ 2D cũng như mô hình 3D hoàn chỉnh.


Giải pháp bao gồm một thư viện các đối tượng gia cố và tiện ích bổ sung đa dạng, mang lại sự tự do tuyệt vời trong việc xác định các tòa nhà và cũng giúp nhận dạng các đối tượng phức tạp. Eptar Reinforcement cũng kiểm tra mã số cốt thép và hiệu chỉnh nếu cần. Với Công cụ Gia cố, người dùng có thể dễ dàng tính toán số lượng cốt thép cần thiết. Danh sách cốt thép có sẵn trên mặt bằng cũng như trong bảng tính tương tác.

Các tính năng chính của Eptar Reinforcement cho Archicad:​

• Thư viện đối tượng gia cố : Plugin này đi kèm với một thư viện phong phú các đối tượng gia cố có thể được sử dụng để thiết kế bất kỳ cấu trúc nào.
• Công cụ vẽ : Plugin cung cấp nhiều công cụ vẽ cho phép nhà thiết kế vẽ cốt thép trên tường, sàn, dầm, cột và các thành phần nghiêng như mái nhà.
• Công cụ Cắt Danh sách : Plugin có công cụ cắt danh sách tự động tạo danh sách thép gia cường. Danh sách này bao gồm thông tin về hình dạng, kích thước, đường kính, chất lượng và trọng lượng của từng thành phần.
• Tích hợp BIM : Plug-in được tích hợp với BIM, nghĩa là thép gia cố có thể được tích hợp vào mô hình tòa nhà 3D.

Lợi ích của việc sử dụng Eptar Reinforcement cho Archicad:​

• Nâng cao năng suất : Plugin cho phép các nhà thiết kế làm việc hiệu quả hơn bằng cách giảm thời gian dành cho việc vẽ và ghi chép phần gia cố.
• Độ chính xác được cải thiện : Các plug-in làm giảm nguy cơ mắc lỗi trong thiết kế thép gia cố.
• Thiết kế tốt hơn : Các plugin cho phép các nhà thiết kế thiết kế bố cục hiệu quả hơn.
• Cải thiện giao tiếp : Plug-in cho phép các nhà thiết kế giao tiếp các thiết kế gia cố của họ hiệu quả hơn với các nhà thầu và nhà cung cấp.

Nhìn chung, Eptar Reinforcement for Archicad là một công cụ hữu ích cho các nhà thiết kế muốn tăng hiệu quả và độ chính xác cho các thiết kế cốt thép của họ.


Đặc trưng:

• gia cố các bức tường nghiêng được cắt vào mái nhà
• xử lý các lỗ mở Archicad trên tường
• sử dụng chính xác định nghĩa lõi kết cấu trong bản sàn
• Danh sách các thành phần ghế sắt
• thông báo tự động về các phiên bản mới
• tự động đặt cốt thép vào các dầm định hình đơn giản bằng cách sử dụng phần tử phức hợp rf_beam
• tự động đặt cốt thép vào cột có cấu hình đơn giản bằng cách sử dụng phần tử phức hợp rf_column
• danh sách các thành phần cốt thép dầm và cột
• các loại thanh cốt thép dạng xem 2D mở rộng
• đảo ngược hướng uốn của thanh cốt thép trong bản sàn và tường
• tùy chọn để chỉ ra nội dung văn bản khác nhau trong nhãn sơ đồ mặt bằng của cốt thép
• tùy chọn để chỉ ra nội dung văn bản khác nhau trong nhãn sơ đồ mặt bằng của lưới
• chỉ ra (chọn) trên sơ đồ mặt bằng tất cả các yếu tố được liệt kê trong Danh sách cắt đã đặt
• Nhà thiết kế bảng lưới
• Danh sách cắt chính xác hơn cho lưới
• Danh sách cắt chính xác hơn cho thép cây
• một số yếu tố bổ sung mới
• Gia cố các cạnh tường bê tông bằng cách đặt thanh cốt thép cắt ở các góc của lỗ mở
• Gia cố các cạnh của tấm bê tông bằng cách đặt các thanh cốt thép cắt ở các góc của lỗ
• Danh sách cốt thép cạnh tấm và cốt thép cạnh tường theo từng thành phần
• Danh sách các thanh cốt thép có chiều dài khác nhau theo chiều dài
• Chỉ báo cập nhật tự động
• Tự động gia cố các đường thẳng, nghiêng và cong
• Tự động gia cố mái bằng lưới và cốt thép
• Tự động gia cố mái phức tạp
• Tự động gia cố nhiều bề mặt mái
• Hầu hết các dạng cốt thép và thanh giằng được sử dụng đều được cài đặt sẵn, nhưng cũng có thể cài đặt các dạng đa giác tùy chỉnh.
• Các thành phần thép có thể xoay được, do đó có thể mô hình hóa các công trình khó hơn (ví dụ như cầu thang)
• Có thể xác định các thành phần phức tạp (cột, dầm và đỉnh).
• Nhiều tùy chọn xem và hiển thị
• Tạo danh sách cắt
• Có thể dễ dàng thực hiện thay đổi trên bố cục và trong cửa sổ Cài đặt đối tượng

Ảnh chụp màn hình

Yêu cầu hệ thống

ArchiCAD INT 28 WIN
Thông tin tập tin

Trang web chính thức: https://www.eptar.hu/reinforcement
Giấy phép: Dùng thử
Phiên bản phần mềm : 7.0.1.663
Tên tệp : EPTARR7.0.1.663ACAD28.rar
Kích thước tệp : 10,4 MB
Loại tệp : *.rar
Máy chủ : Pixeldrain | Box
Ngày tải lên : 29/08/2025
Lần sửa đổi cuối cùng : 29/08/2025
Mật khẩu : sbz

*** Văn bản ẩn: không thể trích dẫn. ***


Mã giải nén tệp là sbz. ​

Thanks!

 

[anna1122]

ขอบคุณครับ

 

[AlsonX]

Can i use it with ArchiCAD 27?

 

[Juraj66]

dakujem

 

[sec.probono]

Thank You

 

[Akpocky]

good

 

[thompagrn]

Excellent

 

[k4racaoren]

Thank you

 

[Kong!!]

Thank you

 

[Dyylan]

ดาวน์โหลด ปลั๊กอิน EPTAR Reinforcement 7.0.1.663 for ArchiCAD 28 | ปลั๊กอินสำหรับ Archicad 28 ฟรี​

Eptar Reinforcement for Archicad เป็นปลั๊กอินที่ออกแบบมาเพื่อช่วยให้นักออกแบบสามารถวาดเอกสาร และระบุรายการเหล็กเสริมที่จำเป็นสำหรับโครงสร้างอาคารใน Archicad โซลูชันนี้ช่วยให้นักออกแบบสามารถทำงานได้อย่างมีประสิทธิภาพมากขึ้นโดยลดเวลาที่ใช้ในการวาดและเอกสารเหล็กเสริม


โซลูชันนี้ช่วยให้นักออกแบบสามารถวาดเอกสารและแสดงรายการการเสริมที่จำเป็นสำหรับอาคารใน ArchiCAD แอปพลิเคชั่นนี้มีเครื่องมือในการกำหนดภาพวาด 2D ทั้งหมดรวมถึงโมเดล 3D ที่สมบูรณ์


โซลูชันประกอบด้วยไลบรารีของวัตถุเสริมแรงต่างๆ และส่วนเสริม ให้อิสระอย่างมากในการกำหนดสิ่งปลูกสร้างและยังช่วยระบุวัตถุที่ซับซ้อนอีกด้วย การเสริมแรง Eptar ยังตรวจสอบหมายเลขรหัสเหล็กเส้นและแก้ไขหากจำเป็น ด้วยเครื่องมือเสริมแรง ผู้ใช้สามารถคำนวณจำนวนเหล็กเส้นที่จำเป็นได้อย่างง่ายดาย รายการเหล็กมีอยู่ในแผนผังชั้นเช่นเดียวกับกำหนดการแบบโต้ตอบ

คุณสมบัติหลักของ Eptar Reinforcement for Archicad:​

• ไลบรารีวัตถุเหล็กเสริม: ปลั๊กอินมาพร้อมกับไลบรารีวัตถุเหล็กเสริมที่หลากหลายที่สามารถใช้ในการออกแบบโครงสร้างใดๆ
• เครื่องมือวาด: ปลั๊กอินมีเครื่องมือวาดที่หลากหลายที่ช่วยให้นักออกแบบสามารถวาดเหล็กเสริมในผนัง แผ่นพื้น คาน เสา และองค์ประกอบเอียง เช่น หลังคา
• เครื่องมือตัดรายการ: ปลั๊กอินมีเครื่องมือตัดรายการที่สร้างรายการเหล็กเสริมโดยอัตโนมัติ รายการเหล่านี้รวมถึงข้อมูลเกี่ยวกับรูปร่าง ขนาด เส้นผ่านศูนย์กลาง คุณภาพ และน้ำหนักของแต่ละองค์ประกอบ
• การผสานรวม BIM: ปลั๊กอินได้รับการผสานรวมกับ BIM ซึ่งหมายความว่าเหล็กเสริมสามารถรวมเข้ากับแบบจำลองอาคาร 3 มิติได้

ประโยชน์ของการใช้ Eptar Reinforcement for Archicad:​

• เพิ่มประสิทธิภาพ: ปลั๊กอินช่วยให้นักออกแบบสามารถทำงานได้อย่างมีประสิทธิภาพมากขึ้นโดยลดเวลาที่ใช้ในการวาดและเอกสารเหล็กเสริม
• ปรับปรุงความถูกต้อง: ปลั๊กอินช่วยลดความเสี่ยงของข้อผิดพลาดในการออกแบบเหล็กเสริม
• การออกแบบที่ดียิ่งขึ้น: ปลั๊กอินช่วยให้นักออกแบบสามารถออกแบบโครงสร้างที่มีประสิทธิภาพมากขึ้น
• การสื่อสารที่ดีขึ้น: ปลั๊กอินช่วยให้นักออกแบบสามารถสื่อสารการออกแบบเหล็กเสริมของตนได้อย่างมีประสิทธิภาพมากขึ้นกับผู้รับเหมาและผู้ขาย

โดยรวมแล้ว Eptar Reinforcement for Archicad เป็นเครื่องมือที่มีค่าสำหรับนักออกแบบที่ต้องการเพิ่มประสิทธิภาพและความถูกต้องของงานออกแบบเหล็กเสริม


Features:

• reinforcement of slanted walls cropped to a roof
• handling of Archicad openings in the wall
• accurate usage of structural core definition in slab
• listing of iron chair element
• automatic notification about new versions
• place automatically the reinforcement in simple profiled beams using rf_beam complex element
• place automatically the reinforcement in simple profiled column using rf_column complex element
• list of beams and column reinforcement elements
• extended 2D view types of rebars
• reverse the bending direction of rebars in slab and wall
• the option to indicate different text content in floorplan labels of rebar
• the option to indicate different text content in floorplan labels of mesh
• indicate (select) on floorplan all elements listed in already placed Cutting list
• Mesh board designer
• More exact Cutting list for Mesh
• More exact Cutting list for Rebar
• some new additional elements
• Reinforcement of concrete wall edges, by placing shear rebars in corners of openings
• Reinforcement of concrete slab edges, by placing shear rebars in corners of holes
• Slab edge reinforcement and wall edge reinforcement listing by components
• Listing of different length rebars by length
• Automatic update indicator
• Automatic reinforcement of straight, slanted and curved
• Automatic reinforcement of roofs with Mesh and Rebar elements
• Automatic reinforcement of complex roofs
• Automatic reinforcement of multiply roof surfaces
• Most used rebar and stirrup forms are preset, but custom polygonal forms can be set too
• Steel elements can be rotated, thus more difficult constructions (e.g. stairs) can be modeled
• Complex elements (columns, beams and crownings) can be defined
• Many view and display options
• Cutting list generation
• Changes can easily be made on the layout and in the Object Settings window as well

Screenshot

System Requirements

ArchiCAD INT 28 WIN
File Info

Official Website : https://www.eptar.hu/reinforcement
License : Trial
Software Version : 7.0.1.663
File Name : EPTARR7.0.1.663ACAD28.rar
File Size : 10.4 MB
File Type : *.rar
Server : Pixeldrain | Box
Upload date : 29/08/2025
Last modified : 29/08/2025
Password : sbz

*** Hidden text: cannot be quoted. ***


รหัสแตกไฟล์คือ sbz ​

Thank you

 

[nhatthu_forever]

How can I download?

 

[konsungnern]

thank you

 

[พรประชา]

ขอบตุณ

 

[Kritsada Suekhan]

ดาวน์โหลด ปลั๊กอิน EPTAR Reinforcement 7.0.1.663 for ArchiCAD 28 | ปลั๊กอินสำหรับ Archicad 28 ฟรี​

Eptar Reinforcement for Archicad เป็นปลั๊กอินที่ออกแบบมาเพื่อช่วยให้นักออกแบบสามารถวาดเอกสาร และระบุรายการเหล็กเสริมที่จำเป็นสำหรับโครงสร้างอาคารใน Archicad โซลูชันนี้ช่วยให้นักออกแบบสามารถทำงานได้อย่างมีประสิทธิภาพมากขึ้นโดยลดเวลาที่ใช้ในการวาดและเอกสารเหล็กเสริม


โซลูชันนี้ช่วยให้นักออกแบบสามารถวาดเอกสารและแสดงรายการการเสริมที่จำเป็นสำหรับอาคารใน ArchiCAD แอปพลิเคชั่นนี้มีเครื่องมือในการกำหนดภาพวาด 2D ทั้งหมดรวมถึงโมเดล 3D ที่สมบูรณ์


โซลูชันประกอบด้วยไลบรารีของวัตถุเสริมแรงต่างๆ และส่วนเสริม ให้อิสระอย่างมากในการกำหนดสิ่งปลูกสร้างและยังช่วยระบุวัตถุที่ซับซ้อนอีกด้วย การเสริมแรง Eptar ยังตรวจสอบหมายเลขรหัสเหล็กเส้นและแก้ไขหากจำเป็น ด้วยเครื่องมือเสริมแรง ผู้ใช้สามารถคำนวณจำนวนเหล็กเส้นที่จำเป็นได้อย่างง่ายดาย รายการเหล็กมีอยู่ในแผนผังชั้นเช่นเดียวกับกำหนดการแบบโต้ตอบ

คุณสมบัติหลักของ Eptar Reinforcement for Archicad:​

• ไลบรารีวัตถุเหล็กเสริม: ปลั๊กอินมาพร้อมกับไลบรารีวัตถุเหล็กเสริมที่หลากหลายที่สามารถใช้ในการออกแบบโครงสร้างใดๆ
• เครื่องมือวาด: ปลั๊กอินมีเครื่องมือวาดที่หลากหลายที่ช่วยให้นักออกแบบสามารถวาดเหล็กเสริมในผนัง แผ่นพื้น คาน เสา และองค์ประกอบเอียง เช่น หลังคา
• เครื่องมือตัดรายการ: ปลั๊กอินมีเครื่องมือตัดรายการที่สร้างรายการเหล็กเสริมโดยอัตโนมัติ รายการเหล่านี้รวมถึงข้อมูลเกี่ยวกับรูปร่าง ขนาด เส้นผ่านศูนย์กลาง คุณภาพ และน้ำหนักของแต่ละองค์ประกอบ
• การผสานรวม BIM: ปลั๊กอินได้รับการผสานรวมกับ BIM ซึ่งหมายความว่าเหล็กเสริมสามารถรวมเข้ากับแบบจำลองอาคาร 3 มิติได้

ประโยชน์ของการใช้ Eptar Reinforcement for Archicad:​

• เพิ่มประสิทธิภาพ: ปลั๊กอินช่วยให้นักออกแบบสามารถทำงานได้อย่างมีประสิทธิภาพมากขึ้นโดยลดเวลาที่ใช้ในการวาดและเอกสารเหล็กเสริม
• ปรับปรุงความถูกต้อง: ปลั๊กอินช่วยลดความเสี่ยงของข้อผิดพลาดในการออกแบบเหล็กเสริม
• การออกแบบที่ดียิ่งขึ้น: ปลั๊กอินช่วยให้นักออกแบบสามารถออกแบบโครงสร้างที่มีประสิทธิภาพมากขึ้น
• การสื่อสารที่ดีขึ้น: ปลั๊กอินช่วยให้นักออกแบบสามารถสื่อสารการออกแบบเหล็กเสริมของตนได้อย่างมีประสิทธิภาพมากขึ้นกับผู้รับเหมาและผู้ขาย

โดยรวมแล้ว Eptar Reinforcement for Archicad เป็นเครื่องมือที่มีค่าสำหรับนักออกแบบที่ต้องการเพิ่มประสิทธิภาพและความถูกต้องของงานออกแบบเหล็กเสริม


Features:

• reinforcement of slanted walls cropped to a roof
• handling of Archicad openings in the wall
• accurate usage of structural core definition in slab
• listing of iron chair element
• automatic notification about new versions
• place automatically the reinforcement in simple profiled beams using rf_beam complex element
• place automatically the reinforcement in simple profiled column using rf_column complex element
• list of beams and column reinforcement elements
• extended 2D view types of rebars
• reverse the bending direction of rebars in slab and wall
• the option to indicate different text content in floorplan labels of rebar
• the option to indicate different text content in floorplan labels of mesh
• indicate (select) on floorplan all elements listed in already placed Cutting list
• Mesh board designer
• More exact Cutting list for Mesh
• More exact Cutting list for Rebar
• some new additional elements
• Reinforcement of concrete wall edges, by placing shear rebars in corners of openings
• Reinforcement of concrete slab edges, by placing shear rebars in corners of holes
• Slab edge reinforcement and wall edge reinforcement listing by components
• Listing of different length rebars by length
• Automatic update indicator
• Automatic reinforcement of straight, slanted and curved
• Automatic reinforcement of roofs with Mesh and Rebar elements
• Automatic reinforcement of complex roofs
• Automatic reinforcement of multiply roof surfaces
• Most used rebar and stirrup forms are preset, but custom polygonal forms can be set too
• Steel elements can be rotated, thus more difficult constructions (e.g. stairs) can be modeled
• Complex elements (columns, beams and crownings) can be defined
• Many view and display options
• Cutting list generation
• Changes can easily be made on the layout and in the Object Settings window as well

Screenshot

System Requirements

ArchiCAD INT 28 WIN
File Info

Official Website : https://www.eptar.hu/reinforcement
License : Trial
Software Version : 7.0.1.663
File Name : EPTARR7.0.1.663ACAD28.rar
File Size : 10.4 MB
File Type : *.rar
Server : Pixeldrain | Box
Upload date : 29/08/2025
Last modified : 29/08/2025
Password : sbz

*** Hidden text: cannot be quoted. ***


รหัสแตกไฟล์คือ sbz ​

thanks you verymuch for software

 

[Monthawat]

thank you

 

[Civil cnx]

thankyou

 

[Suebwong_p]

Thank so much

 

[Monthawat]

thank